Boat detailing services

Interior & exterior boat detailing in Austin

From our $299 full reset to oxidation removal and 10-year ceramic coatings, here's everything we do and what's included, step by step.

Interior & exterior boat detailing

Every inch, inside and out

Our $299 special isn't a quick rinse. It's a full interior and exterior boat detail that resets the whole boat.

Exterior boat detailing: hand waxing a boat's gelcoat

Exterior boat detailing

  • Full wash and hand dry, no spots or streaks
  • Water spot and scum line removal
  • Hull, deck and glass cleaned
  • Ceramic spray wax, or a 12-month hand wax
  • Oxidation removal and ceramic coating available
Interior boat detailing: cleaning boat seats and vinyl

Interior boat detailing

  • Floors pressure washed
  • Seats and vinyl deep cleaned and conditioned
  • Cup holders, gauges, buttons and every nook
  • Compartment lids and frames (inside too when emptied)
  • All glass and windshield cleaned
Stage 1 · $299 up to 25 ft

$299 Boat Detailing Special

This is our most booked service and the one most boats need. It's a complete interior and exterior boat detail that takes the boat from "lived-in" back to "ready for the weekend."

Outside, we wash the whole boat, take off light to medium water spots and the scum line, clean the hull and glass, then hand dry so nothing is left spotted or streaked. A ceramic spray wax finishes the exterior so water beads off.

Inside, we pressure wash the floors, deep clean and condition the seats and vinyl, and get the cup holders, gauges, buttons and every nook. Storage compartments get cleaned inside if they're emptied before we arrive, otherwise we clean the lids and frames.

  • Full exterior wash, hand dried with no spots or streaks
  • Light to medium water spot removal
  • Scum line and hull cleaning
  • Floors pressure washed
  • Seats and vinyl deep cleaned and conditioned
  • Cup holders, gauges, buttons and every nook
  • All glass cleaned
  • Ceramic spray wax finish
  • Cover off and back on
Stage 1 boat detailing: $299 Boat Detailing Special
Stage 2 boat detailing: Wash + 12-Month Wax
Stage 2 · $499 up to 25 ft

Wash + 12-Month Wax

Stage 2 is for boats that look dull, spotted or haven't been detailed in a while. It includes everything in the $299 special, then goes after the problems a normal wash can't fix.

An acid wash takes off heavy, etched-in water spots, the scum line and that yellow tint on the hull. Then we hand-apply a 12-month marine wax that protects the gelcoat from sun and water and restores shine.

  • Everything in the $299 special
  • Acid wash for heavy water spots
  • Scum line and yellowed hull brightened
  • Hand-applied 12-month marine wax
  • Brings back shine and protects the gelcoat
Stage 3 · $999 up to 25 ft

Cut, Buff & Oxidation Removal

If your gelcoat feels chalky or looks faded, that's oxidation. Wax won't fix it. It has to be cut off.

Stage 3 includes everything in Stage 2, plus a machine cut and buff (a 1-step compound or a 1-step polish, whichever the finish needs) to remove oxidation, chalkiness and water spots and bring back a deep shine. It's finished with wax, and you can upgrade to a full 2-step paint correction for $400.

  • Everything in Stage 2
  • Machine cut and buff (1-step compound or polish)
  • Removes oxidation, chalkiness and etched spots
  • Finished with protective wax
  • Upgrade to a 2-step correction for $400
Stage 3 boat detailing: Cut, Buff & Oxidation Removal
Marine ceramic coating

Keep it clean between details

A G-Technique marine ceramic coating bonds to your gelcoat and makes water, grime and spots slide right off, so the boat stays easier to clean all season.

  • 3-year coating · $250
  • 5-year coating · $400, warrantied for its rated life when properly maintained
  • 10-year coating · $800, our longest-lasting protection

Coatings are added on top of a detail. Boats older than 5 years need at least a Stage 2 first, and heavy oxidation needs Stage 3, so the coating bonds to a clean, polished finish.

Marine ceramic coating applied to a boat in Austin
Compare

Which detail does your boat need?

Not sure? Text us a photo and we'll tell you honestly.

What's includedStage 1 · $299Stage 2Stage 3
Full exterior wash & hand dry
Light to medium water spot removal
Interior: floors, seats, vinyl, nooks
Ceramic spray wax
Acid wash for heavy water spots—
Hand-applied 12-month marine wax—
Machine cut & buff——
Oxidation & chalkiness removal——
Price (up to 25 ft)$299$499$999
Free quote · fast reply

Get your free boat detailing quote

Tell us about your boat and we'll text you a price, usually within minutes. Or skip the wait and book online now.

Get my boat quote

Takes 30 seconds. No spam, ever.

Got it! Your quote is on the way.

We'll text you back shortly with your quote.

Want to lock in a time now?

Book Online Now
FAQ

Boat detailing questions, answered

How much does boat detailing cost in Austin?

Our full interior and exterior boat detail is $299 for boats up to 25 feet, then $12 per foot over that. A wash plus 12-month wax (Stage 2) is $499, and cut-and-buff oxidation removal (Stage 3) is $999, both up to 25 feet. Use the price calculator on our pricing page to see your exact number. Austin sales tax applies.

Do I need to be there?

No. Give us the address (and slip number or gate code if it's at a marina) and we handle the rest. We text you before and after photos when we're done.

Do you need water or power?

No. In the Austin area we bring our own water and power, so we can detail your boat at a marina slip, on a lift, in a driveway or at a storage lot.

Where do you detail boats?

Anywhere around Austin: Lake Travis, Lake Austin, Lake LBJ, Lakeway, Spicewood, Leander, Round Rock, Georgetown, South Austin and the rest of the metro, roughly 40 to 50 miles out.

What's the difference between the three stages?

Stage 1 ($299) is a full interior and exterior clean with a ceramic spray wax. Stage 2 ($499) adds an acid wash for heavy water spots and a hand-applied 12-month marine wax. Stage 3 ($999) adds a machine cut and buff to remove oxidation and bring back the shine. If your gelcoat looks chalky or faded, you want Stage 2 or 3.

Do you detail cabin boats?

Yes, but boats with a living area inside are quoted separately. Send us a quick quote request or text us a photo and we'll price it.

Can you ceramic coat my boat?

Yes. We apply G-Technique marine ceramic coatings in 3-year ($250), 5-year ($400) and 10-year ($800) options. Boats older than 5 years need at least a Stage 2 first so the coating bonds to a clean, polished finish.

Ready for a boat that looks brand new?

Book your $299 interior and exterior boat detail in about a minute. We'll take it from there.